Valve apex that is sharply rounded, at less than 90°.
A stria in the shape of an elongated chamber. The external wall of the alveolus is perforated by many areolae and the internal wall is perforated by one long opening. Plural form is alveoli. An example genus is Pinnularia.
One to four transapical striae that interrupt the typical striae at the poles. These structures are restricted to the genus Geissleria. The annulae may be distinctive or barely discernible.
The long axis of the valve face of a pennate diatom, passing through the apices. Follows the midline of the valve and may be curved, as in the genus Cymbella. See Pervalvar axis and Transapical axis.
Valve apex that is abruptly tapered to a fine point.
Pennate diatoms lacking a raphe on either valve. Examples of araphid genera include Diatoma, Fragilaria, and Synedra.
Curved like a bow or bent along the apical axis.
Perforation, or pore, in the diatom valve. Usually many are grouped to form a
The plural form is areolae.
The shape of the areola can be important in diatom taxonomy, and may be lineolate, punctate, loculate, or in the shape of a letter C.
Becoming thin or slender.
A German term for “surface growth” or “overgrowth”. A community of small animals and plants that adhere to surfaces in aquatic environments. Green algae and diatoms make up the dominant component of an aufwuchs. Small crustaceans, rotifers, and protozoans are also commonly found in both fresh water and marine aufwuchs faunas, while insect larvae, oligochaetes and tardigrades are peculiar to freshwater aufwuchs faunas. An English pronunciation might be “OWF-vooks”.
A special cell that develops and expands before producing a new frustule. Maximum size of a population is restored through auxospore formation. Auxospores are usually associated with sexual reproduction.
A narrow ridge of silica along the axial area on the inside of the valve bordering the raphe.
Mastogloia smithii is an example which has two axial costae. Together they form the sides of a groove, or gutter (Paddock and Kemp, 1990), widening slightly at the central nodule and stopping short of the distal raphe ends.
See also costa.
Internal ‘plate’ of silica that occludes the inner openings of the areolae. Found in some species of Gomphoneis where its margin appears as the longitudinal line that is visible in light microscopy.
A structure that is divided into two branches.
A stria having two rows of areolae.
A valve end, or apex, having the shape of a head, or the shape of a rounded knob.
Other terms for valve ends include subcapitate (less strongly capitate), rostrate, and subrostrate (less strongly rostrate). Subcapitate and subrostrate are quite similar and many taxa may be described as having subcapitate to subrostrate valve ends.
In general, capitate and subcapitate ends are more expanded than the most narrow point on the valve, while rostrate and subrostrate ends are not more expanded than the most narrow point.
A type of central process unique to the genus Orthoseira. The internal openings are simple, while the external openings are composed of well-defined collars.
In raphid diatoms, the thickly silicified area located between the proximal raphe slits. Often thickened, both in valve and girdle views. It is the site where the silica deposition vesicle deposits the first silica during valve formation.
The series of linking, siliceous bands associated with a
Each band is called a girdle band, or copula (from Latin for band or link; plural is copulae). Plural form is cingula.
Each valve has its own cingulum and the valves of most diatoms have a cingulum. The epivalve has the epicingulum and the hypovalve has the hypocingulum. The epicingulum always overlaps the hypocingulum. The two cingula together compose the girdle, or cincture.
Girdle bands may be secreted after the vegetative cell division that produced the valve. In other words, while the deposition of the valve is tied to cell division, the deposition of its girdle bands may not be.
Having the shape of a club. Usually applied to describe the asymmetry of Gomphoneis and Gomphonema.
A valve surface covered with small bumps or elevated bits of silica.
The narrow, hyaline area on the valve mantle in the genus Aulacoseira. A small furrow, or sulcus, separates the collum from the portion of the valve mantle with areolae. See also ringleiste.
A thin flap of silica on the external valve face, lying along the apical axis. Hyaline or finely porous. Proximal margin formed by the edge of the raphe slit. Extends unsupported over the valve face. Distal margin is free.
May lie flat or may be slightly to distinctly elevated. May partially or completely cover the striae. Found in genera such as Fallacia, Lyrella, Mastogloia, Microcostatus, Nitzschia and Sellaphora. Plural form is conopea. From Greek for canopy.
Details of the conopea are best viewed with the scanning electron microscope, but may be visible with the light microscope as longitudinal lines near the raphe or as unornamented areas of the valve face.
Conopea have been found to contain symbiotic nitrogen-fixing cyanobacteria.
See also pseudoconopeum.
Striae that lean toward the central nodule, with the sternum as the origin. Convergent striae may occur throughout the valve, at the valve center, or at the valve apices. In contrast, striae are radiate, or divergent, if they lean away from the central nodule, with the sternum as the origin.
An unornamented, elongated thickening of the valve. Usually refers to a thickening parallel to the striae. Plural form is costae. From Latin for rib.
See also axial costa.
An internal valve occurring in species in the genus Craticula. This craticular valve consists of a raphe-sternum and robust transverse bars. Frustules with normal morphology produce the craticular valve under conditions of high solute concentration. The formation of these internal valves is not linked to mitosis.
A thin, domed, porous plate of silica covering the internal opening of an areola, found in genera such as Thalassiosira and Stephanodiscus. A cribrum is a type of
Visible only with the SEM. Plural form is cribra.
A similar structure with finer pores, found in many raphid diatoms, is the hymen.
Cross-shaped, usually applied to describe the valve outline of some diatoms.
The portion of a raphe branch that is near the valve end, or valve apex. See also proximal raphe.
Having notably more length than width. Having a long and slender shape.
Native, or limited to a specific geographic area.
Algae which grow within the subsurface of sediments, clays, and silt.
An organism that lives inside another, benefitting both individuals. For example, endosymbiotic cyanobacteria often inhabit living cells of the genus Epithemia.
Algae which grow on the surface of rock or stone.
Algae which grow on the surface of sediments, clays, and silt, i.e., residing at the water/sediment interface.
The growth habit of organisms that live on the surfaces of plants or other algae.
The growth habit of living attached to sand grains, or moving through sand.
The larger theca of the frustule. The epitheca overlaps the hypotheca. A theca is composed of a valve and its associated cingulum. From Greek, theca means sheath or case (plural is thecae), so epitheca means outer sheath.
area of thickened silica extending from the central area of some pennate diatoms. A transverse fascia is formed by secondary deposition of silica into depressions on the valve. Examples of genera having a transverse fascia include Luticola and Staurophora. Plural form is facsiae.
See also stauros for a similar structure.
Series, or bundle, of rows of areolae oriented radially in some centric diatoms.
Internal strut that provides structural support to the canal that contains the raphe. Plural form is fibulae. The fibulae extend transapically from the raphe canal to the valve face. Examples of genera having fibulae include Denticula, Nitzschia, and Surirella. From Latin for clasp, pin, or brooch.
Having the shape of a thread.
The narrower pole, or apex, of the valve in genera having the shape of a club. Often has a pore field. Examples include Didymosphenia, Gomphoneis, and Gomphonema.
The siliceous parts of the diatom cell wall. Composed of the larger
and the smaller
The epitheca overlaps the hypotheca similar to a pill box or Petri dish. From Latin for a little piece.
See also valve and cingulum.
A tubular process of some centric diatoms. The fultoportula consists of a central tubular process surrounded by two or more satellite pores. Externally, the fultoportula appears as either a tube or a simple pore in the valve wall. The plural form is fultoportulae.
Usually associated with the secretion of §-chitin to maintain buoyancy in the plankton.
Having the shape of a spindle. Broadest at the middle and tapering at both apices.
Faint striae, composed of areolae that may not penetrate the valve wall.
Convex, rounded, protuberant; exceeding a semi-circle but less than a circle.
The broader pole, or apex, of the valve in genera having the shape of a club. Example genera include Didymosphenia, Gomphoneis, and Gomphonema.
The internal, distal termination of the raphe in the shape of a pair of lips or a rolled tongue. The helictoglossa occurs in many raphid diatoms. If present, it can be distinguished in the light microscope in valve view by optical dissection (focusing through many narrow, optical planes). It may also be visible in girdle view as a thickened lip of silica. Plural form is helictoglossae. From Greek for rolled tongue.
A valve with poles, or apices, of the apical axis having different shapes. Heteropolar valves are asymmetrical to the transapical axis. Example genera include Gomphoneis and Gomphonema.
Frustules in which one valve differs from the other morphologically. Frustules may be heterovalvar in their valve ornamentation or their raphe system. The term is often applied to the monoraphid diatoms, in which one valve has a normal raphe valve and the other has a rapheless valve.
The illustration, collection, or specimen that represents a taxon. 2 - A type specimen. 3 - A type material recognized by the International Code of Nomenclature for algae, fungi, and plants (ICN).
For diatoms, many authors designate an individual frustule or valve on a slide as the type specimen. They do this by imaging this specimen and circling it with a diamond objective marker, or marking its coordinates with a device such as an England Finder. While the ICN allows the whole slide containing the type specimen to be designated as the holotype, diatomists tend to avoid this practice in order to minimize later misinterpretation of the intent of the author.
The ICN uses a system called typification that makes objective identification possible by linking the name of a taxon with a holotype. Typification is intended to create a stable system of nomenclature by tying the published name to a holotype or a suite of holotypes.
Several other kinds of type material are recognized by the ICN, including isotype, lectotype, neotype and paratype. Types are not expected to be “typical” or “idealized” specimens, although workers may find such use of the terms.
See also synonym.
A silica extension with the shape of a hood on the inside of a valve. It occurs only in some species of Planothidium where it partly covers the inside of the asymmetrical central area of the rapheless valve. See also rimmed depression.
Any area of a diatom valve that is unornamented (lacking pores or other structures).
A very delicate, porous membrane of silica covering the opening of an areola or an alveolus. The pores of the hymen may be round or elongated and range from 5-10 nm (0.005-0.010 µm) in their shortest diameter. Found in many raphid genera such as Cocconeis and Neidiopsis. Visible only with the SEM. Plural form is hymenes.
A similar structure with larger pores, found in many centric and some raphid diatoms, is the cribrum.
An unornamented, thicked rib of silica located between fascicles. Usually applied to centric diatoms.
Fissure that joins the proximal raphe ends in some cymbelloid taxa. Instead of distinct terminations, the proximal raphe ends are connected internally by a fissure.
A valve with poles, or apices, of the apical axis having the same size and shape. Isopolar valves are symmetrical to the transapical axis.
A specimen from the original collection of the holotype and of the same taxon. A type material recognized by the International Code of Nomenclature for algae, fungi and plants (ICN).
In the genus Entomoneis, the line that appears where the keel meets the valve surface. The junction line may be straight or have irregular contours and may be variously ornamented.
A ridge of silica elevated above the valve surface. Formed by a folding of the valve wall. Keels occur in genera such as Nitzschia, Surirella, and Entomoneis.
The keel has the raphe on its outer edge, as in the illustration.
A space or gap in the apical silica of the
between the apex and the subapical projections on the sides of the ring. May have a pyriform shape (have the shape of a pear).
Specific to the genus Mastogloia. Visible with SEM; usually not discernable with LM. From Latin for gap. Plural form is lacunae. An example species having a lacuna is Mastogloia calcarea.
A valve having an elongated outline, widest at the middle and tapering to both ends. Width may range from wide to narrow.
A thickened area of silica without pores on the valve face parallel to the sternum and interrupting the striae. One on each side of the sternum connected at the central node, giving the whole structure a lyrate shape (shape of a lyre). A freshwater example occurs in Mastogloia pumila.
A silica projection on a split ring girdle band. The ligula of a younger girdle band fills, or nearly fills, the gap caused by the split in the older band next to it. Found in many diatom taxa. From Latin for strap. Plural form is ligulae.
An areola that is elongated in the apical direction. From Latin for little line. Plural form is lineolae.
Lineolae compose the striae of the genus Navicula sensu stricto, or the Lineolate section of Navicula. This type of stria is called a lineolate stria.
In the genus Aulacoseira, linking spines join frustules together in a chain, or filament.
The acronym for light microscope. The study of diatoms relies on a compound light microscope in which a beam of light passes through optical lenses to view an image of the specimen. The light microscope provides images of the transparent features of the diatom.
Contributors to the Diatoms of the United States project use research grade light microscopes with the minimum specifications of a 100x, 1.3 numerical aperature (NA) oil immersion objective lens and 1.3 NA condenser lens.
The scanning electron microscope (SEM) is also important in diatom studies.
Having a locule, or chamber. A loculate
is made of a chamber with a
velum and a
for two of its walls. A loculate valve has loculate areolae. From Latin for small space.
Example genera with loculate areolae include Diploneis, Muelleria and Neidium.
A chamber having the shape of a tube inside the valve, oriented along the apical axis. It occurs in genera such as Neidium and Muelleria, which have valves consisting of two layers of silica with the canal lying between them. The canals appear as longitudinal lines and may be central or marginal.
A solid silica structure that runs along each side of the raphe in genera such as Frustulia.
A structure having the shape of a crescent moon. Applies to a thickened silica shape in the central area of certain species of Caloneis.
The downturned side of the valve surrounding the valve face. When a frustule is viewed in girdle view, the mantle is visible.
Pennate diatoms having a
on only one
A monoraphid diatom is a type of
diatom. Example genera include Cocconeis, Achnanthidium, and Eucocconeis.
During the ontogeny of monorahid diatoms, a raphe begins to form on each valve. One valve completes its raphe, and becomes the raphe valve. The other valve fills its incipient raphe with silica, leaving a thickened axial rib, and becomes the rapheless valve.
The genus Nupela includes some monoraphid species and some biraphid species. In this web flora, Nupela is included in the biraphid group.
A genus with a single, validly published binomial. An example of a monotypic genus is Diprora Main, which contains only the species D. haenaensis Main.
A polysaccharide built of amino sugars and often associated with proteins. Secreted from a variety of openings in the diatom frustule. Mucopolysaccharides can be components of mucilage, a complex colloidal material used by diatoms for movement, protection, and adhesion.
Valve margin having the shape of a boat. The genus Navicula was described in 1822 by Bory for this shape.
Obovate (inversely ovate, or narrow toward the central area and wider toward the apices), with a concavity in each side, like the body of a violin.
A bulbous chamber on the inside of the
Found only in the genus Mastogloia. Usually arranged in a row on each side of the valvocopula, together forming the
partectal ring. Plural form is partecta.
The partecta secrete mucilage to the outside of the diatom cell through relatively large pores, the partectal pores, in the wall of the valvocopula. These pores are connected to the partecta by the partectal ducts.
The group of bilaterally symmetric diatoms. This is a heterogeneous group that includes araphid, monoraphid, and biraphid taxa. In older taxonomic systems, pennate diatoms are contrasted with the centric diatoms. Note, however, that these distinctions are artificial, and pennate and centric groups are not natural evolutionary lineages.
Algae growing on or around submerged aquatic plants. The term is often used in a more general sense to describe the algae growing on any submerged surface.
The axis of the valve which is perpendicular to the center of the valve face. In centric diatoms, the center is the meeting point of the radii. In pennate diatoms, the center is the meeting point of the apical and transapical axes.
The collection of organisms, including algae, that float or drift in a body of water.
In diatoms, the pigmented organelle that is the site of photosynthesis.
Plastids contain carotinoid pigments such as beta-carotene, diatoxanthin, diadinoxanthin, and fucoxanthin. They also contain a combination of chlorophylls a, c1, c2, and c3, depending on the species.
Most diatom plastids appear golden brown because the carotenoid pigments mask the color of the chlorophylls.
A hyaline thickening of silica at the valve apices in some pennate species. The genus Sellaphora possesses variable development of polar bars.
A transapical undulation, or elevated ridge, of the external valve face. The porca is particular to the genus Surirella. Plural form is porcae.
An area of fine pores, or perforations, through the diatom valve. It is the site of the extrusion of mucopolysaccarides for making stalks and pads.
A small perforation through the valve. Plural form is porelli. Groups of closely packed porelli occur in ocelli, pseudocelli and apical pore fields.
In raphid diatom ontogeny, the side of the valve formed from the initial branching of the raphe sternum. See secondary side.
The growth habit of lying flat, firmly attached by mucilage to a surface. Example surfaces include rocks, filamentous algae, macrophytes, and even other diatoms.
A valve apex having the appearance of being drawn out or pulled apart.
The portion of a raphe branch near the central nodule of a valve. The proximal raphe ends border the central nodule of a valve. See distal raphe.
A hyaline flap of silica forming a cavity on the external valve face, lying along the apical axis. Proximal edge, or edge near the raphe, arises a distance from the raphe. Distal edge joins the valve near the valve margin. Cavity formed by the pseudoconopeum is open at both ends. Striae on the floor of the cavity have fewer areolae than striae outside the pseudoconopeum. Areolae or other ornamentation are present between the pseudoconopeum and the raphe. Found only in some marine species of the genus Mastogloia.
By contrast, the proximal margin of a true conopeum forms the edge of the raphe slit. Compared to lateral sterna, pseudoconopea do not join at the central nodule.